TB caliper digital with solar energy
ref 15400
Accuracy and fast result. Economic : use the solar energy
- measuring range 40 mm
- accuracy / resolution 0,02 mm
- solar energy / supplied battery LR1130 1,5 V
- between 0 & 40 °C. Humidity level : no influence until 80 %.
- Automatic sleep mode
- Automatic wake-up when moving
- Max speed of reading 1,5 m / second
Instructions
unscrew the lock screw your TB caliper with solar energy
switch “on”
select “mm” or “inch” pressing the top blue button. Each pression changes the selection.
Close the Vernier with a normal pression to close the jaws.
Then press the button “zero” so the display indicates 0 and is calibrated.
You can now measure the thickness of the skin.
Maintenance
-
Before using the TB caliper, clean the ruler with dry cotton to avoid problems due to dusts.
-
Keep your instrument clean and dry
-
The measurement faces must be cleaned with cotton. do not use oil, acetone or other oraganic solution. You will preserve the battery life if switching OFF when not using the instrument
-
Do not apply electric power on the instrument, do not use electric pencil
-
Battery have to be replaced when the display is flashing : open the battery lid, place a new battery + on top and replace the lid. In case of problem when cahnging the battery (display not working) take off the battery, wait 30 s and replace the battery and select “0”
Delivered in case
Very resistant box with handle for all the models
repair & maintenance
in our French workshop
French workshop
Located about 100 km from Paris.